Examples
The following examples show how to configure and verify typical IOZER applications step by step.
Available examples
| Example | Model | Content |
|---|---|---|
| Modbus RTU to TCP Gateway | IOZER basic | Read twelve measurements from an Eastron SDM630 over Modbus RTU, provide them in TCP holding registers, and verify them using mbclient. |
| Push button with two functions | IOZER basic | Toggle two digital outputs using single/double clicks or short/long presses, with Blockly and alternative JavaScript code. |
| Fan: Two-point control | IOZER basic | Control a fan using 1-Wire temperature, enable, a temperature setpoint, and hysteresis, with Blockly, JavaScript, and optional Home Assistant integration. |
| 1-Wire to Modbus TCP | IOZER basic | Send three 1-Wire temperatures to a Beckhoff BC9020 over Modbus TCP, with register mapping, scaling, and TwinCAT code. |
