Settings

The operating parameters of IOZER basic are configured under Settings. These include the device name, network, users, datapoints, physical inputs and outputs, and the 1-Wire, Modbus, and MQTT interfaces.

Changes are first saved and then applied to the running device. Network and interface changes may require a restart or a new connection.

Interface

The settings are organized into tabs:

General
Network
Users
Datapoints
Digital inputs
Digital outputs
1-Wire
Modbus
MQTT

Operating principle

The buttons in the header apply to all tabs:

Action	Meaning
Discard	Resets unsaved changes
Save	Saves the configuration permanently
Apply	Activates the saved changes on the running device

For commissioning, a step-by-step approach is recommended: first check the network and time base, then configure the interfaces, create datapoints, and finally create program events.