Technical data
This page lists the technical data for IOZER basic (IOZ-B-10).
Electrical data
| Parameter |
Value |
| Supply voltage |
7–30 V DC |
| Power consumption |
typ. < 5 W |
| Current consumption |
Depends on the configuration |
| Protection functions |
Reverse polarity protection, overvoltage protection, short-circuit protection |
Interfaces
| Interface |
Description |
| Ethernet |
10/100 Mbit, RJ45 |
| Wi-Fi |
IEEE 802.11 b/g/n, 2.4 GHz |
| RS485 |
Modbus RTU, IOZER link, optional 120-ohm bus termination using a jumper |
| 1-Wire |
1-Wire bus |
| Digital inputs |
8 galvanically isolated inputs |
| Digital outputs |
8 normally open outputs |
| USB |
USB-C service interface |
Digital outputs
| Parameter |
Value |
| Number |
8 normally open (NO) contacts |
| Voltage |
max. 30 V DC |
| Current |
max. 300 mA per channel |
| Switching capacity |
max. 10 VA |
| Configuration |
Arranged in groups of four contacts with a shared common terminal (COM) |
| Status indication |
One LED per output |
| Parameter |
Value |
| Number |
8 galvanically isolated optocoupler inputs |
| Voltage |
max. 24 V DC |
| 0 signal |
≤ 2 V DC |
| 1 signal |
≥ 5 V DC |
| Undefined range |
> 2 to < 5 V DC |
| Configuration |
Arranged in groups of four inputs with a shared ground terminal (GND) |
| Status indication |
One LED per input |
Wi-Fi
| Parameter |
Value |
| Frequency band |
2.4 GHz |
| Standard |
IEEE 802.11 b/g/n |
| Mode |
STA or AP |
| Security |
WPA2 / WPA3 |
| Antenna |
Internal |
Environment
| Parameter |
Value |
| Degree of protection |
IP20, installation in enclosed operating locations |
| Operating temperature |
0 °C to +50 °C |
| Storage temperature |
-20 °C to +70 °C |
| Humidity |
10–90%, non-condensing |
Mechanical data
| Parameter |
Value |
| Installation |
Control cabinet / distribution board |
| Enclosure |
Industrial ABS plastic enclosure |
| Mounting |
35 mm DIN rail according to EN 60715 |
| Width |
5 modular units |
| Flammability rating |
UL 94 HB |
| Device dimensions |
90 × 79 × 50 mm (W × H × D) |
| Packaging dimensions |
118 × 84 × 56 mm (W × H × D) |
| Device weight |
120 g |
| Weight including packaging |
155 g |
Terminals
| Parameter |
Value |
| Terminal type |
Pluggable screw terminals |
| Conductor cross-section |
0.14–0.75 mm², AWG 26–18 |
Software functions
- Local logic programming using Blockly and JavaScript
- Event-based control using triggers and actions
- Web interface for configuration and programming
- MQTT client
- Modbus RTU as master or slave
- Modbus TCP as client or server
- REST API
- NTP time synchronization
- Local data persistence
Firmware and updates
- Secure OTA firmware updates
- Firmware distribution through IOZER connect
- Certificate-based device authentication
- Manual firmware updates by file upload
IOZER basic is designed for CE conformity, RED, and RoHS and complies with the following EMC and radio standards:
- EN 301 489-1
- EN 301 489-17
- EN 300 328
| Product |
Article number |
| IOZER basic |
IOZ-B-10 |
Scope of delivery
- IOZER basic device
- Quick guide
Home
Shop
Docs
Connect
Contact
